TP Allergy Panel 11 Mold Group IgE
This mold IgE blood test panel measures multiple mold-specific antibodies to help you interpret sensitization patterns and plan practical exposure control.
This panel bundles multiple biomarker tests in one order—your report explains how results fit together.
This is a lab panel, not a single test. The TP Allergy Panel 11 Mold Group IgE checks a set of mold-specific IgE antibodies from one blood draw, so you can see whether your immune system is sensitized to common indoor and outdoor molds—and whether your results cluster around certain mold families that often travel together in real-life exposures.
Do I need this panel?
You might consider a mold-specific IgE panel if your symptoms flare in damp buildings, basements, after water damage, during leaf/compost seasons, or when you spend time around visible mold or musty odors. People often look into this panel when they have persistent nasal congestion, sneezing, post-nasal drip, itchy eyes, cough, wheeze, chest tightness, or eczema flares that seem tied to environments rather than foods.
This panel can also be useful if you already know you have allergies (or asthma) and you are trying to sort out whether mold sensitization is part of the picture—especially when symptoms persist despite typical dust/pet/pollen avoidance. Parents may use it when a child’s cough, nighttime symptoms, or eczema worsens in certain homes, schools, or after storms.
If you have had a “positive IgE” before and felt stuck, a focused mold panel can help you move from a single confusing number to a pattern across multiple molds. That pattern can guide practical next steps like targeted environmental control, discussing allergy medications with your clinician, or deciding whether broader environmental testing makes sense.
This panel supports clinician-directed care and shared decision-making. It does not diagnose an allergy on its own; your history, timing of symptoms, and (when appropriate) skin testing or supervised challenges are what confirm clinical allergy.
This panel measures allergen-specific IgE in blood; results reflect sensitization (immune recognition) and must be interpreted alongside your symptoms and exposures.
Lab testing
Order labs to measure TP - Allergy Panel 11, Mold Group (IgE)
from $222.67 at Quest Diagnostics
About 1 week
Schedule online — results typically within a week
Clear next steps
Guidance included, with follow-up care available
HSA / FSA
Eligible for pre-tax health spending accounts
Get this panel with Vitals Vault
Vitals Vault makes it straightforward to order a mold IgE lab panel and get a clear, plain-language explanation of what the group of results may mean together. You can use the panel to check for mold sensitization patterns that might be contributing to rhinitis, asthma symptoms, or eczema flares.
After your results are in, you can use PocketMD to review the panel as a whole—what stands out, what looks like background sensitization, and what might be cross-reactivity. That context matters because mold IgE can be positive even when mold is not the main driver of your symptoms.
If your results suggest a broader mold signal (or if your symptoms and environment strongly point to mold despite low/negative results), you can discuss whether repeating testing after changes in exposure or ordering a wider mold panel is a better next step than making big lifestyle changes based on a single number.
- One blood draw can cover multiple mold-specific IgE markers
- Designed for pattern-based interpretation (not one isolated result)
- PocketMD can help you translate results into practical questions for your clinician
- Useful for follow-up testing after remediation or major exposure changes
Key benefits of TP Allergy Panel 11 Mold Group IgE
- Shows a mold sensitization pattern across multiple species instead of relying on one IgE result.
- Helps you connect symptom timing (damp buildings, basements, leaf/compost seasons) with specific mold groups.
- Supports more targeted environmental control plans by identifying likely mold families involved.
- Clarifies when a “positive mold IgE” may be low-level background sensitization versus a stronger signal across the panel.
- Helps you discuss asthma, rhinitis, or eczema trigger management with your clinician using objective lab data.
- Can guide whether you should expand to broader mold testing or focus on non-mold triggers (dust mites, pets, pollens).
- Creates a baseline you can compare over time, especially after remediation or major exposure changes.
What is the TP Allergy Panel 11 Mold Group IgE panel?
The TP Allergy Panel 11 Mold Group IgE is a blood test panel that measures allergen-specific immunoglobulin E (IgE) antibodies to a set of common molds. IgE is the antibody class involved in immediate-type allergic reactions. When you are sensitized to a mold, your immune system has made IgE that recognizes proteins from that mold.
Because mold exposure is often mixed (multiple species in the same damp environment) and because some molds share similar proteins, looking at several mold-specific IgE results together can be more informative than a single test. A panel view can help you see whether your results cluster around indoor dampness-associated molds, outdoor/seasonal molds, or a broader pattern that may reflect cross-reactivity.
This panel does not measure “mold toxicity,” mycotoxins, or overall immune function. It specifically evaluates IgE sensitization to the molds included. A positive result means your immune system recognizes that mold allergen; it does not automatically prove that mold is the cause of your symptoms or that you will react every time you are exposed.
Mold IgE testing is most useful when it matches your story: symptoms that reliably worsen in certain environments, improvement with avoidance, or respiratory/allergic symptoms that fit an IgE-mediated pattern. If your symptoms are more consistent with irritation (for example, strong odors causing headache) or with non-IgE inflammation, your clinician may consider other evaluations in addition to (or instead of) IgE testing.
What do my panel results mean?
Low or negative results across the panel
If most or all mold-specific IgE markers are low/negative, it suggests you are not sensitized to the molds tested, or that any sensitization is below the lab’s detection threshold. This makes an IgE-mediated mold allergy less likely as the main driver of your symptoms, especially if your symptoms do not clearly track with damp environments. However, low results do not rule out non-IgE reactions (irritant effects), sensitization to molds not included in the panel, or symptoms driven by other common triggers like dust mites, pets, pollens, viral illness, reflux, or indoor air quality issues.
A focused, low-level pattern (limited positives)
Many people see a panel with one or two low-level positives while the rest are negative. This can represent mild sensitization, cross-reactivity (IgE that recognizes similar proteins across different sources), or a signal that may only matter when exposure is high. In this situation, your symptom history becomes the deciding factor: if you reliably flare in mold-prone settings and improve away from them, those limited positives may still be clinically relevant. If you do not have a clear exposure link, limited low-level positives often do not justify major elimination steps on their own.
Multiple elevated mold-specific IgE results (broader sensitization)
When several molds in the panel are elevated—especially if the elevations are moderate to high or span both indoor and outdoor molds—it suggests broader mold sensitization. This pattern is more likely to align with clinically meaningful allergy when your symptoms fit (rhinitis, asthma symptoms, itchy/watery eyes, or eczema flares) and when exposure timing makes sense. Broader sensitization can also occur alongside other environmental allergies, so it is common to interpret this panel as one piece of a bigger trigger map rather than a standalone answer.
Factors that influence mold IgE results (and how to interpret them)
Your results can be influenced by recent and ongoing exposure (living/working in damp environments), coexisting atopy (a tendency toward allergies/eczema/asthma), and cross-reactivity between molds and other allergens. Total IgE can be high in some people with eczema or multiple allergies, which may increase the chance of low-level positives that are not strongly symptomatic. Medications like antihistamines typically do not suppress blood IgE results (they affect symptoms), but immune-modulating therapies and certain health conditions can complicate interpretation. Most importantly, the “right” interpretation depends on whether your symptoms reliably occur with mold exposure and improve with avoidance or remediation—numbers alone cannot confirm causality.
What’s included in this panel
- ALTERNARIA ALTERNATA (M6) IGE
- Aspergillus Fumigatus (M3) Ige
- Candida Albicans (M5) Ige
- CLADOSPORIUM HERBARUM (M2) IGE
- Mucor Racemosus (M4) Ige
- S Chartarum (Rgm24) Ige
Similar tests to consider
Frequently Asked Questions
Is this a single mold test or a multi-test panel?
It is a lab panel. One blood draw is used to measure multiple mold-specific IgE antibodies, so you can see a pattern across different molds rather than one isolated result.
Do I need to fast before this mold IgE panel?
Fasting is usually not required for allergen-specific IgE blood testing. If you are combining this panel with other labs that do require fasting, follow the instructions for the full set of tests you are ordering.
Does a positive mold-specific IgE mean mold is definitely causing my symptoms?
Not necessarily. A positive result indicates sensitization (your immune system recognizes that mold). Whether it is clinically relevant depends on your symptom pattern, timing, and exposures. Some people have low-level positives without clear symptoms from mold.
Can cross-reactivity make my panel look positive?
Yes. Some allergen proteins are similar across different molds, and IgE can sometimes bind to related proteins. Cross-reactivity is one reason it helps to interpret the whole panel alongside your history rather than reacting to a single positive line.
How is blood IgE testing different from skin prick testing for mold?
Blood testing measures mold-specific IgE circulating in your blood, while skin testing measures an immediate skin response to allergen extracts. Either can be appropriate depending on your situation, medications, and access. Your clinician may use one or both to clarify whether sensitization matches symptoms.
If my panel is negative, can mold still be a problem for me?
Yes. A negative IgE panel makes an IgE-mediated mold allergy less likely for the molds tested, but it does not rule out irritant effects from damp environments, sensitization to molds not included, or other indoor triggers (dust mites, VOCs, smoke, poor ventilation).
When should I retest this panel?
Retesting can be reasonable if your exposure changes significantly (for example, after remediation or moving), if symptoms change substantially, or if you are expanding your evaluation to a broader environmental allergy workup. Your clinician can help decide timing; IgE patterns typically do not change day-to-day, so immediate repeat testing is rarely helpful.